Customer Service

Questions about our products? We are here for you!

service@schellenberg.de +49 (0) 271-89056-444

Mon.-Fri.: 7:30 am - 9:00 pm
Sat.: 8.00 am - 2.00 pm

Service

awning motor plus 50

awning motor plus 50 Item-no. 20277 20278
awning motor plus 50

Sun protection via wireless control: the strong wireless awning motor PLUS 50 operates large awnings with a fabric area of 258 ft² (with a correctly functioning awning) in approximately one minute. Thereby an awning motor is comfortably controlled by a remote control or timer. The installation of the wireless awning motor PLUS (maximum torque 50 Nm) can be directly mounted into the awning shaft. The external design of the awning is not affected thereby.

Benefits

  • Smart wireless control via remote control or timer from Schellenberg (frequency: 868 MHz)
  • The awning motor PLUS 50 works maintenance-free directly in the awning shaft
  • No obvious external visual difference of the awning
  • Strong motor with a robust metal casing
  • Strong 50 Nm torque (maximum) that opens large awnings in approx. 1 minute
  • When the awning encounters an obstacle the awning motor PLUS 50 automatically turns off: protection from overheating and overloading
  • Data retention in case of power failure
  • Motor with mechanically set end points
  • Delivered ready to install (adapter set and motor mount included)
EAN Number 4003971202776
Item Number INT 20278
length (mm) 650 mm
Diameter (mm) 78 mm
Tensile Force (Nm) 50 Nm
Color yellow
max. tensile force (N) 50 kg
motor guarantee 4
Display Screen -
End position setting mechanical
Operating Mode Wireless

Product in use

Applications

 

The external appearance of the awning does not change with the installation of the wireless awning motor PLUS 50.

  • Awning type: open arm awnings or semi-cassette awnings
  • Material area maximum 258 ft² or maximum 64 x 43 ft²
  • Awning shaft with a diameter of 78 mm and a length of minimum 65 cm

Helpful Hints for Installation

 

  • A connection to your power grid should be within reach of your awning. 
  • Roll up the awning and remove the handle.
  • Then you should demount the awning on the two trestles, and loosen the awning stock.
  • Then please secure the square end of the awning shaft with a cotter pin. 
  • The awning motor may then be pushed into the shaft and the motor bearings are remounted.
  • Then reattach the awning and let the connection to the power grid be carried out by an authorized electrician.
  • Finally, adjust the end positions.
to Schellenberg Professional

the partner for craftsmen and assembly professionals

go to Schellenberg Professional
To the Schellenberg online shop

Go to the online shop here ...

Continue to the online shop
 
To the top of the page