Customer Service

Questions about our products? We are here for you!

service@schellenberg.de +49 (0) 271-89056-444

Mon.-Fri.: 7:30 am - 9:00 pm
Sat.: 8.00 am - 2.00 pm

Service

The Roller Shutter Belt Drive RolloDrive 55 from Schellenberg opens and closes your roller shutters automatically at your chosen time or whenever you want with the touch of a button. The 230V strength motor runs smoothly and quietly and operates shutters with an area of up to 53 ft². The roller shutter control RolloDrive 55 is installed with surface mounting on the wall or window reveal and easily replaces inlet winders. Opening the shutter box is not necessary! The power supply is taken care of with a power cord included in delivery, so that no electrical work is necessary by the installation. A benefit of the electric belt winder is that while in stand-by mode it only uses one watt. This roller shutter drive  is easy to install and uninstall and is therefore ideal for tenants: the electric belt winder can move with you to your new apartment! The obstacle detection feature provides safety as it automatically stops the shutters when it encounters an obstacle. Additionally, this shutter belt control from Schellenberg is TÜV approved. The programming of the automatic timer is easily done from the control panel. It is user friendly with its four buttons and two LED function lights. Even the end points are easily set with the buttons. Even during a power outage the settings and the end points of the shutters are saved. The RolloDrive 55 opens and closes plastic shutters with an area of max. 53 ft² and aluminum shutters with an area of 21 ft². This can vary depending on the material, design and weight of the shutters. The weight should not exceed 66 lbs (max. pulling force: 66 lbs).

Schellenberg Tip: Enhance your Belt Winder Rollodrive 105 PLUS with the compatible sun sensor from Schellenberg (It. No. 22720). It controls the electric belt winder with the strength of the sunlight and provides a comfortable room temperature. Additionally, it protects your plants, furniture and carpets from heat and UV-rays. The sun sensor is simply attached to the window with a suction cup and with a cable connected to the shutter control.

Benefits

 

  • Shutters don’t need to be strenuously operated by hand
  • Easy control through buttons or timer
  • Easy replacement of inlet winders
  • Increased safety: obstacle detection
  • Power supply via outlet
  • TÜV approved
EAN Number 4003971227557
Item Number INT 22725
Width (mm) 101 mm
Height (mm) 245 mm
Depth (mm) 40 mm
Tensile Force (kg) 30 kg
max. tensile force (kg) 30 kg
Preformance Aufputz
Hole Spacing 230 mm
max. roller shutter area KST m² 5.0
Roller shutter system MINI/MAXI
possible roller shutter belt width 14 oder 23 mm
Display Screen -
max. roller shutter area ALU m² 2.5
Color white

Product in use

Applications

 

  • For easy shutter control
  • Replaces hand operated inlet winders
  • Made for belts with a width of 14 mm (Schellenberg system MINI) and 23 mm (Schellenberg system MAXI)
  • Maximum area of the shutters: 53 ft² for plastic shutters or 21 ft² for aluminum shutters. The maximum pulling force being 66 lbs
  • Belt length to use for shutter system MAXI from Schellenberg: 13 ft for 1.3 mm belt strength or 16 ft for 1.0 mm belt strength
  • Set up in a dry room
  • For surface mounting

*The max area of the shutter can vary depending on the material, design and weight of the shutters. The maximum pulling force may not be exceeded. The performance of the drive can be affected by various factors (ex. Constructional conditions). From the above, no claims can be derived, as they may differ in individual cases.

Installation Instructions

 

  • Completely close the shutters
  • Remove the previous inlet winder from the wall box and carefully unwind the belt. SAFETY HINT: The spring drum of the winder has electricity, so there is a risk of injury. Please wear safety gloves when opening the belt winder!
  • Cut the belt 20 cm under the wall box
  • Take the end of the belt 20 cm wide and cut a 5 mm slit in the middle of the belt
  • Fold the belt as the instructions say into the electric belt winder
  • Attach the power cord in the belt winder
  • Mount the belt winder on the wall or window reveal
  • Plug in the power cord to an outlet
  • Program the end points via the control panel
  • The electric winder is ready to be started up

SCHELLENBERG TIP:The belt winder works best with undamaged belts. Therefore it is better to replace your old or frayed belt with a new one when installing the electric belt winder. Shutter belts that fit with your electric belt winder can be found at Schellenberg under the section “Rolling Shutter Accessories”.

to Schellenberg Professional

the partner for craftsmen and assembly professionals

go to Schellenberg Professional
To the Schellenberg online shop

Go to the online shop here ...

Continue to the online shop
 
To the top of the page