Customer Service

Questions about our products? We are here for you!

service@schellenberg.de +49 (0) 271-89056-444

Mon.-Fri.: 7:30 am - 9:00 pm
Sat.: 8.00 am - 2.00 pm

Service

Schellenberg tubular motor MINI PLUS 10

PLUS tubular motors from Schellenbergprovide for more comfort by opening and closing of the roller shutters with the setting of roller shutter end positions. This can be easily set with the touch of a button.

a maximum 25kg tensile load offers the MINI PLUS tubular motor from Schellenberg with a 10Nm torque. With this the roller shutter motor drives plastic roller shutters with a max. area of 6 m²*

a timer or a shutter switch starts the Schellenberg motor. More comfort awaits you with the wireless control. This upgrade can be done at any point.

Benefits

  • with the simple touch of a button the end positions can be quickly set
  • Operating options for the tubular motor PLUS: timer or roller shutter switch
  • can be upgraded to wireless technology
  • possibilities to control of more components (with the help of a relay)
  • adapter as well as powerful wall bearing (adjustable height) included
  • The Schellenberg roller shutter motor is ready for installation.
  • No reprogramming after a power outage necessary: the data stays saved.
  • Schellenberg tubular motor has practical overload protection
  • CE conformer tubular motor from Schellenberg
  • roller motor with 4 year warranty

* For roller shutters made of wood or aluminum the area is less. Influence of dimensions may be from weight and type of roller shutters. The decision factor of the tubular motor is the tensile force, which can take up to a max. of 25kg.

EAN Number 4003971204107
Item Number INT 20411
length (mm) 550 mm
Diameter (mm) 40 mm
Tensile Force (kg) 25 kg
Tensile Force (Nm) 10 Nm
max. tensile force (kg) 25 kg
max. tensile force (N) 10 kg
motor guarantee 4
max. roller shutter area KST m² 6.0
Roller shutter system MINI
End position setting electronic
Color yellow

Product in use

PIA_RA_20410_01

Installation Advice

  • First, the shutter belt should be removed, then the octagonal shaft.
  • Please not that the shaft may need to be shortened during the installation of the roller shutter motor.
  • When the smooth running wall bearing is attached, the drive unit can be inserted.
  • Next the electrical connection can be carried out.
  • Program the end positions.
  • Then the tubular motor can be used.
to Schellenberg Professional

the partner for craftsmen and assembly professionals

go to Schellenberg Professional
To the Schellenberg online shop

Go to the online shop here ...

Continue to the online shop
 
To the top of the page