Customer Service

Questions about our products? We are here for you!

service@schellenberg.de +49 (0) 271-89056-444

Mon.-Fri.: 7:30 am - 9:00 pm
Sat.: 8.00 am - 2.00 pm

Service

A quite running and low maintenance roller shutter motor: that is what the MAXI Tubular Motor STANDARD 10 from Schellenberg is with a turning movement of 10 Nm and a pulling force of 44 lbs. The control is easy and functions with a roller shutter switch or with a timer. If you want to enhance you control of the Schellenberg tubular motor it can be retrofitted to have wireless control at any time. With the help of the two setting screws the end points of the roller shutter motor is easily set.

Benefits

 

  • Ready to install (wall bearing and easy to assemble adapter set included)
  • Thermal/overheating protection
  • Data retention during power outage
  • Standby uses 0.0 watts
  • Power supply: 230 V / 50 Hz
  • Maintenance free and low wear roller shutter motor
  • Control via timer or roller shutter switch
  • Multiple control of different motors possible with a relay
  • Schellenberg wireless control possible with retrofitting
  • ·TÜV and CE approved
  • 3 year guarantee

*the maximum pulling force of the tubular motor is crucial. As a guide you can use the following values for the calculation of your roller shutters:

  • Plastic roller shutters: ~8 lbs per ft²
  • Aluminum roller shutters: ~lbs per ft²
EAN Number 4003971206101
Item Number INT 20611
length (mm) 480 mm
Diameter (mm) 60 mm
Tensile Force (kg) 20 kg
Tensile Force (Nm) 10 Nm
max. tensile force (kg) 20 kg
max. tensile force (N) 10 kg
motor guarantee 3
max. roller shutter area KST m² 4.2
Roller shutter system MAXI
End position setting mechanical
Color yellow
Installation Instructions-20610 11.26 MB / Adobe Acrobat File Download

Product in use

Applications

 

With its turning movement of 10 Nm the Schellenberg Tubular Motor MAXI STANDARD 10 can operate your roller shutters effortlessly. No belt winder or belt will be necessary anymore.

  • Install in the roller shutter box (in the octagonal shaft, 60 mm)
  • Roller shutter motor-pulling force max. 44 lbs

Helpful Hints for Installation

 

  • Open the roller shutter box and uninstall the belt drive and octagonal shaft (shorten the shaft if necessary)
  • Mount the tubular motor wall bearing and insert the drive unit
  • Electric connection of the operating element
  • Set the end points of the tubular motor
  • Start up the tubular motor
to Schellenberg Professional

the partner for craftsmen and assembly professionals

go to Schellenberg Professional
To the Schellenberg online shop

Go to the online shop here ...

Continue to the online shop
 
To the top of the page