Customer Service

Questions about our products? We are here for you! +49 (0) 271-89056-444

Mon.-Fri.: 7:30 am - 9:00 pm
Sat.: 8.00 am - 2.00 pm


The STANDARD Tubular Motor MINI 6 from Schellenberg-a quite running roller shutter motor-can open and close light roller shutters. The maximum pulling force is 33 lbs and the turning movement is 6 Nm*. The Schellenberg tubular motor can be controlled with a roller shutter switch or a timer. A wireless control can be retrofitted at any time. As a STANDARD roller shutter motor the tubular motor from Schellenberg has two setting screws to mechanically set the end points. This type of installation has been proven to be robust and durable.



  • Ready to install (wall bearing and adapter included)
  • Thermal/overheating protection
  • Data retention during power outage
  • Standby uses 0.0 watts
  • Power supply: 230 V / 50 Hz
  • Maintenance free and low wear roller shutter motor
  • Control via timer or roller shutter switch
  • Multiple control of different motors with a relay possible
  • Schellenberg wireless control possible with retrofitting
  • TÜV and CE approved
  • 3 year guarantee

*the maximum pulling force of the tubular motor is crucial. As a guide you can use the following values for the calculation of your roller shutters:

  • Plastic roller shutters: ~8 lbs per ft²
  • Aluminum roller shutters: ~lbs per ft²
EAN Number 4003971201069
Item Number INT 20107
length (mm) 485 mm
Diameter (mm) 40 mm
Tensile Force (kg) 15 kg
Tensile Force (Nm) 6 Nm
max. tensile force (kg) 15 kg
max. tensile force (N) 6 kg
motor guarantee 3
max. roller shutter area KST m² 4.0
Roller shutter system MINI
End position setting mechanical
Color yellow
Installation Instructions-20106 10.69 MB / Adobe Acrobat File Download
Installation Instructions-20106 11.26 MB / Adobe Acrobat File Download

Product in use



Roller shutter belts and belt winders are a thing of the past with the STANDARD tubular motor MINI 6 Schellenberg. The roller shutter motor works with a turning movement of 6 Nm and operates your roller shutters effortlessly.

  • Install the roller shutter motor in a 40 mm octagonal shaft
  • Max. 33 lbs pulling force
  • Suitable for most front mounted and top mounted boxes
to Schellenberg Professional

the partner for craftsmen and assembly professionals

go to Schellenberg Professional
To the Schellenberg online shop

Go to the online shop here ...

Continue to the online shop
To the top of the page