Customer Service

Questions about our products? We are here for you!

service@schellenberg.de +49 (0) 271-89056-444

Mon.-Fri.: 7:30 am - 9:00 pm
Sat.: 8.00 am - 2.00 pm

Service

The Schellenberg Roller Shutter Motor STANDARD MINI 10 is quite running and can operate light roller shutters. The turning movement is 10 Nm and the maximum pulling force of the motor is 55 lbs. With the timer or the roller shutter switch the roller shutter motor from Schellenberg can be easily controlled. There is also the possibility to convert it to wireless control. The end points of the Schellenberg STANDARD Tubular motors can be mechanically set with the help of the setting screws.

Benefits

 

  • Ready to install (wall bearing and adapter included)
  • Thermal/overheating protection
  • Data retention  even during power outage
  • Standby uses 0.0 watts
  • Power supply: 230 V / 50 Hz
  • Maintenance free and low wear roller shutter motor
  • Control via timer or roller shutter switch
  • Multiple control of different motors with a relay possible
  • Schellenberg wireless control possible with retrofitting
  • TÜV and CE approved
  • 3 year guarantee

*the maximum pulling force of the tubular motor is crucial. As a guide you can use the following values for the calculation of your roller shutters:

  • Plastic roller shutters: ~8 lbs per ft²
  • Aluminum roller shutters: ~lbs per ft²
EAN Number 4003971201106
Item Number INT 20111
length (mm) 485 mm
Diameter (mm) 40 mm
Tensile Force (kg) 25 kg
Tensile Force (Nm) 10 Nm
max. tensile force (kg) 25 kg
max. tensile force (N) 10 kg
motor guarantee 3
max. roller shutter area KST m² 6.0
Roller shutter system MINI
End position setting mechanical
Color yellow
Installation Instructions-20110 11.26 MB / Adobe Acrobat File Download

Product in use

Applications

 

Roller shutter belts and roller shutter winders are no longer necessary when you install the MINI STANDARD tubular motor with a turning movement of 10 Nm. Then your roller shutters will open and close easily.

  • To be installed in the octagonal shaft (40 mm). This can be found in the shutter box.
  • Max. area of 65 ft² for plastic roller shutters
  • Max. area of 43 ft² for aluminum roller shutters
  • The maximum pulling force is 55 lbs
to Schellenberg Professional

the partner for craftsmen and assembly professionals

go to Schellenberg Professional
To the Schellenberg online shop

Go to the online shop here ...

Continue to the online shop
 
To the top of the page