Schellenberg Screw-on Belt Winder Design MINI in white, belt winder to mount on the wall or the window frame


With this modern screw-on belt winder from Schellenberg you can improve the value of your home. This belt winder does not only look elegant, but with its rounded cover if offers a comfortable grip when you open your roller shutters. Additionally, the belt winder MINI can swivel 180˚ and with its width of only 22 millimeters, it is the thinnest model. Yet this winder is also very stable.

An especially attractive feature of the Belt Winder Design from Schellenberg is its separate wall mount. This allows for an easy and effortless removal of the belt winder at any time. Surface mounting on the wall as well as removal of the belt winder on the door or window frame is possible.

With the pre-assembled shutter belt (16 feet long, 14 mm wide) the installation is easy as the belt winder box does not need to be opened.

This belt winder for your roller shutters is offered in white with a gray roller shutter belt. The distance between holes for mounting is 8 cm.



  • Installation on the wall or on the window frame
  • Elegant and flat screw-on belt winder
  • Can swivel up to 180˚
  • Easy removal of the belt winder from the wall mount
  • Pre-assembled belt included
EAN Number 4003971501503
Width (mm) 22 mm
Height (mm) 143 mm
Depth (mm) 157 mm
Hole Spacing 80 mm
Preformance Aufputz
Roller shutter system MINI
Color white
Installation Instructions-50150 5.17 MB / Adobe Acrobat File Download

Product in use


  • For roller shutters on doors and windows
  • This screw-on belt winder from Schellenberg is ideal for installation on the window frame or wall. The distance between holes for mounting is 8 cm.
  • For the Schellenberg Roller Shutter System MINI or for octagonal shafts with a diameter of 40 millimeters and shutters with a slat height of 37 mm.

Helpful Hints for Installation


  • Close the roller shutters
  • Remove the old shutter belt as well as the belt winder
  • Remove the shutters from the octagonal shaft
  • Secure the new belt winder on the window or door frame or on the wall
  • Pull the shutter belt about 14 feet out of the winder
  • Thread the belt through the belt guide on the roller shutter box
  • Attach the loose end of the belt on the pulley. Make sure to turn in the correct direction!
  • Reattach the shutters on the octagonal shaft
  • Open the roller shutters again
to Schellenberg Professional

the partner for craftsmen and assembly professionals

go to Schellenberg Professional
To the Schellenberg online shop

Go to the online shop here ...

Continue to the online shop
To the top of the page