Schellenberg Screw-on Winder MINI in brown-distance between holes: 14.5cm


The robust screw-on belt winder MINI from Schellenberg fits perfectly into your living space with its timeless design. The belt wider with the 180˚ swivel is easily mounted on your window reveal or wall. The distance between holes for attachment is 14.5cm. The dimensions of this white screw-on belt winder from Schellenberg are 28x159x120 mm.

In the screw-on winder from Schellenberg a pre-assembled roller shutter belt is ready. This is especially practical. It reduces assembly effort of the belt winder considerably: the roller shutter does not have to be laboriously rolled up on the reel of the belt winder during installation.

The integrated Schellenberg Roller Shutter Belt in gray has a width of 14 mm (Schellenberg Roller Shutter System MINI) and a length of 16 feet.

EAN Number 4003971505044
Item Number INT 50508
Width (mm) 22 mm
Height (mm) 159 mm
Depth (mm) 120 mm
Hole Spacing 145 mm
Preformance Aufputz
Roller shutter system MINI
Color brown
Installation Instructions-50504 5.20 MB / Adobe Acrobat File Download

Product in use



  • The screw-on belt winder MINI from Schellenberg can be mounted on the window frame or on the wall. This belt winder is the correct choice, when your roller shutter belt comes out of the wall.
  • The screw-on belt winder is quickly and easily integrated with the Schellenberg Roller Shutter System MINI. It works with the MINI-System from Schellenberg with an octagonal shaft diameter of 40 mm or with the height of the roller shutter slats being 37 mm.

Helpful Hints for Installation


  • Close the roller shutters
  • Demount the old belt winders and old roller shutter belt  
  • Loosen the roller shutters from the octagonal shaft
  • Mount the new belt winder on the wall or window frame
  • Pull the belt about 14 feet out of the belt winder and then thread it through the belt guide of the roller shutter box
  • Attach the loose end of the roller shutter belt to the belt pulley
  • Wind the belt onto the belt pulley by turning the octagonal shaft (make sure you turn it the right direction)
  • Reattach the roller shutters on the octagonal shaft
  • Put back the cover or the roller shutter
to Schellenberg Professional

the partner for craftsmen and assembly professionals

go to Schellenberg Professional
To the Schellenberg online shop

Go to the online shop here ...

Continue to the online shop
To the top of the page